Welcome to KEM -

Your Partner for Flow Measurement and Control

  • Language Selection

Turbine Flow Meters with Flange Connections (HM F)

for lubricating and non-lubricating media

The HM F turbine flow meter series (F for flange connections) is used to measure continuous and discontinuous flow rates. They are mainly used for lubrication and non-lubrication media. They are particularly suitable for low and medium viscosity liquids, such as water, emulsions, glycol mixtures and light oils.

Only high-grade steels that even withstand corrosive liquids are used in the production of turbine flow meters. There are no welding seams in contact with the media thanks to the innovative design. All common flange connections can be realized as well. Combined with the use of tungsten carbide bearings, the HM F guarantees optimum measurement accuracy and an extremely long service life even under the toughest application conditions.

 

Technical Data

  • Measuring Ranges: 0.3 up to 13,400 l/min
  • Measuring Accuracy: up to ±0.1 %
  • Repeatability: ±0.05 % (under the same conditions)
  • Linearity: ±1 % of actual flow
  • Measuring Span:
    • Standard: 1:10
    • Extended: on request
  • Viscosity Range: 0.8 up to 100 mm²/s
  • Materials:
    • Housing: as per DIN 1.4404 [AISI 316L] (others on request)
    • Wheels: as per DIN 1.4122, 1.4460 [AISI 329] (others on request)
    • Bearing: Tungsten carbide sleeve bearing
  • Pressure: up to 400 bar [5,800 psi]
  • Medium Temperature: -60 °C up to +350 °C [-76 °F up to +662 °F]

  

  

  

Help us find the right solution for your application! Simply fill out the online application form and send it to KEM Küppers Elektromechanik GmbH.

  

Downloads