Welcome to KEM -

Your Partner for Flow Measurement and Control

  • Language Selection

Turbine Flow Meters for High Pressure Applications (HM HP)

with high pressure connections for operating pressures up to 4,000 bar [58,000 psi]

The HM HP (HP for high pressure connection) turbine flow meter series is used to measure continuous and discontinuous flow rates with very high operating pressures. They are mainly used for lubrication and non-lubrication media. They are particularly suitable for low and medium viscosity liquids, such as water, emulsions, additives and inhibitors.

Only high-grade steels that even withstand corrosive liquids are used in the production of turbine flow meters. The extreme pressure resistance of the flowmeter can be guaranteed through the use of a high-strength housing material. Combined with the use of tungsten carbide bearings, the HM HP guarantees optimum measurement accuracy and an extremely long service life even under the toughest application conditions. 

 

Technical Data

  • Measuring Ranges: 0.3 up to 120 l/min
  • Measuring Accuracy: up to ±0.1 %
  • Repeatability: ±0.05 % (under the same conditions)
  • Linearity: ±1 % of actual flow
  • Measuring Span:
    • Standard: 1:10
    • Extended: on request
  • Viscosity Range: 0.8 up to 30 mm²/s
  • Materials:
    • Housing: as per DIN 1.3980
    • Wheels: as per DIN 1.4460 [AISI 329]
    • Bearing: tungsten carbide
  • Pressure: up to 4,000 bar [58,000 psi]
  • Medium Temperature: -40 °C up to +150 °C [-40 °F up to +302 °F]

  

  

  

Help us find the right solution for your application! Simply fill out the online application form and send it to KEM Küppers Elektromechanik GmbH.

  

Downloads