Welcome to KEM -

Your Partner for Flow Measurement and Control

  • Language Selection

Turbine Flow Meters for Solvents (HM TC-R)

with integrated sensor electronics

The HM TC-R turbine flow meter series (TC-R for BSPP ports and compact electronics) is used to measure continuous and discontinuous flow rates. Mainly used for non-lubricating media. Especially well-suited for low-viscosity fluids such as water and solvents.

Only high-grade steels that even withstand corrosive liquids are used in the production of turbine flow meters. This flowmeter with integrated sensor electronics is extremely compact with small dimensions. Combined with the use of tungsten carbide bearings, the HM TC-R guarantees optimum measurement accuracy and an extremely long service life even under the toughest application conditions.

 

Technical Data

  • Measuring Ranges: 0.3 up to 85 l/min
  • Measuring Accuracy: up to ±0.1 %
  • Repeatability: ±0.05 % (under the same conditions)
  • Linearity: ±1 % of actual flow (viscosity 1 mm²/s)
  • Viscosity Range: 0.6 up to 1 mm²/s
  • Materials:
    • Housing: as per DIN 1.4305 [AISI 303]
    • Wheels: as per DIN 1.4460 [AISI 329]
    • Bearing: Tungsten carbide sleeve bearing
  • Pressure: up to 630 bar [9,135 psi]
  • Medium Temperature: -40 °C up to +80 °C [-40 °F up to +176 °F]

  

Pickups and Amplifiers

  • Frequency output push-pull
  • Compact, integrated in the housing
  • Electrical connection: 12x1 plug, 5 pin, type 713, A coded

  

  

Help us find the right solution for your application! Simply fill out the online application form and send it to KEM Küppers Elektromechanik GmbH.

  

Downloads